Silicon Dust HDHomeRun Bedienungsanleitung PDF herunterladen (Seite 10)

Detecting the programs on a physical channel:

The HDHomeRun will detect the programs (sub-channels). Use the get streaminfo command to

query the detected programs:

Format: hdhomerun_config <id> get /tuner<n>/streaminfo

Example: hdhomerun_config FFFFFFFF get /tuner0/channel streaminfo

The output format is:

<program number>: <virtual major>.<virtual minor> [<name>] [(<flags>)]

Example output:

3: 20.1 KBWB-HD

4: 20.4 AZTECA

Digital cable does not always provide the channel name or virtual channel number:

1: 0.0

2: 0.0 (encrypted)

3: 0.0 (control)

It may take several seconds after setting the channel for the stream information to be fully

populated (depending on how long the channel takes to lock and how often the stream

information is sent by the broadcaster/cable provider).

Filtering by program (sub-channel):

The HDHomeRun supports automatic PID filtering by program number or virtual channel number:

Format: hdhomerun_config <id> set /tuner<n>/program <program number>

hdhomerun_config <id> set /tuner<n>/program <virtual channel number>

Example: hdhomerun_config FFFFFFFF set /tuner0/program 3

hdhomerun_config FFFFFFFF set /tuner0/program 11.2

When filtering by program the MPEG TS tables are generated by the HDHomeRun. The result is a

valid single-program transport stream.

The program filter is cleared when a set channel or a set filter command is received.

Advanced: By default the PAT and PMT are generated. To also generate a ATSC-style TVCT use:

hdhomerun_config <id> set /tuner<n>/program "<program number> tvct_from_pmt=<virtual major>.<virtual

minor>(<name>)"

Example: hdhomerun_config <id> set /tuner0/program "3 tvct_from_pmt=11.2(TEST)"

Advanced: On cable systems the video elementary stream may be flagged as DC-II. To change

this indication to MPEG2 add the pmt_dc2_to_mpeg2 flag:

hdhomerun_config <id> set /tuner<n>/program "<program number> pmt_dc2_to_mpeg2 tvct_from_pmt=<virtual

major>.<virtual minor>(<name>)"

Example: hdhomerun_config <id> set /tuner0/program "3 pmt_dc2_to_mpeg2 tvct_from_pmt=11.2(TEST)"

1 2 ... 5 6 7 8 9 10 11 12

Keine Kommentare

Silicon Dust HDHomeRun Bedienungsanleitung Seite 10