Silicon Dust HDHomeRun Bedienungsanleitung PDF herunterladen (Seite 3)

II.Software Installation

The latest HDHomeRun drivers, code, and firmware can be found on the Silicondust website:

http://www.silicondust.com/downloads

The HDHomeRun TECH requires the HDHomeRun Software release 20090215 or newer.

Windows:

Download and install the latest Windows release of the HDHomeRun software.

The installation process will automatically detect and upgrade the firmware in any HDHomeRun

TECH units detected on the local subnet.

Location: The location setting is not used by the TECH hardware and can be left blank.

Signal source: The signal source should be set to “Digital Antenna” or “Digital Cable” as

appropriate for the intended use of each tuner.

Application: The application setting is only required if a DVR application is used. When the TECH is

used for non-DVR use this setting has no effect and can be left at the default.

Channels: Untick “Connect to the Silicondust Lineup server” to disable channel name correction

information. A channel scan may be run to verify correct operation.

When the installation process is complete it is recommended that the HDHomeRun program

directory be added to the PATH so that the hdhomerun_config utility can be run from a cmd

prompt. The default program directory is “C:\Program Files\Silicondust\HDHomeRun\”

Linux/*BSD/Solaris:

Download and extract the libhdhomerun archive.

Run "make" to compile hdhomerun_config.

Copy hdhomerun_config to /usr/local/bin

VideoLAN VLC:

VideoLAN VLC is a third party video player that works with the HDHomeRun TECH:

http://www.videolan.org/vlc/

TSReader:

TSReader is a third party Transport Stream analyzer for Windows that works with the

HDHomeRun TECH:

http://www.coolstf.com/tsreader/

1 2 3 4 5 6 7 8 ... 11 12

Keine Kommentare

Silicon Dust HDHomeRun Bedienungsanleitung Seite 3