Silicon Dust HDHomeRun Bedienungsanleitung PDF herunterladen (Seite 2)

I. Hardware:

Front

1. Power LED

2. Network LED

3. Tuner0 LED

4. Tuner1 LED

Back

6. Power connector

7. Network connector

8. Tuner1

9. Tuner0

Power:

The HDHomeRun TECH should be used with the supplied 5V 1A power adapter.

Ethernet:

The HDHomeRun TECH can be connected to a network switch (100baseT or Gigabit), or can be

connected directly to a computer/laptop Ethernet port.

Direct-connect: The Ethernet port on the HDHomeRun TECH is Auto-MDX (auto-crossover) and

does not require a cross-over cable when connected directly to a computer/laptop.

Tuners/RF:

Each tuner on the HDHR-TECH-US supports 8VSB, QAM265 (ITU Annex B), and QAM64 (ITU

Annex B) with an RF range of 55-861MHz (cable channels 1 to 135).

The signal level for digital cable must be in the range of -12dBmV to +40dBmV. Lower signal

levels can be measured.

1 2 3 4 5

6 7 8 9

1 2 3 4 5 6 7 ... 11 12

Keine Kommentare

Silicon Dust HDHomeRun Bedienungsanleitung Seite 2